用于氫氣泄露檢測
For Hydrogen Leak Detection
用途： 燃料電池，工業用氫氣檢測儀
Applications: Industrial gas leak detector, Research/Analysis
檢測濃度范圍： 0 ~ 4 vol.%
輸入電壓：5V ± 0.25V DC
功耗：約 0.25W
外部輸出：模擬輸出
尺寸：35.2 (W) x 45.4 (D) x 20.25 (H) mm
重量：24g
Measurement range: 0 ~ 4 vol.%
Supply voltage: 5V ± 0.25V DC、
Power consumption: Approx. 0.25W
Signal output: Analog
Size: 35.2 (W) x 45.4 (D) x 20.25 (H) mm
Weight: 24g
對象氣體：氫氣
Target gas: Hydrogen
FH2-HY11是為了預防燃料電池系統的氫氣泄露而最新開發成功的氫氣傳感器模塊。這些應用需要用到一個可靠的氫氣傳感器，F(xiàn)IS公司以獨特的技術開發了這款催化燃燒式傳感器，擁有最低檢測量和寬幅表面面積。這款傳感器的研發成功，實現了快速響應和高耐硅混合物中毒的特性。這些功能實現了在各個應用場景下預期的超長壽命，可以長期使用不需要替換。FIS公司把復雜的電子設計和軟件設計相結合，讓氫氣傳感器在檢測氫氣方面發揮了以下主要特性。
The FH2-HY11 is a newly developed hydrogen sensormodule, specifically designed for preventing hydrogenleaks in fuel cell systems. For these applications, areliable hydrogen sensors is required and FIS hasdeveloped a new catalytic combustion type hydrogensensor with a minimum mass and wide surface areausing a unique technology. The development of thissensor realizes a rapid response speed and strongpoisoning resistance against silicone compounds.These features achieve the expected demands forlong life in various applications, without any need forreplacing modules over a long period. In combinationwith sophisticated electronics and software design, FISoffers the following features in hydrogen leak detection.
